
Product Description
The Tree Shear Swivel option allows the operator the flexibility of cutting and trimming tree limbs that might be interfering with field edges, etc. This option is manually operated. It can be placed in either the standard horizontal position for cutting trees at ground level or be placed in a vertical position for cutting tree limbs.
![]() | ![]() |
Operating Instructions
Remove the two 3/4" bolts.
After removing the bolts, raise the tree shear approximately four feet off the ground & manually turn the shear vertically.
Replace one of the bolts & tighten with 200 Ft/Lbs of torque.
Cut desired limbs & then reverse the procedure to cut horizontally again
Features
2" Machined and Hardened Pin
" x 2" x 2" Square Tubing Frame
All of our skid steer attachments are made from 100% welded steel and are made right here in the gold ole USA. We offer deep discounts on all of our products and also offer quantity discounts when making large orders.
We understand that you want to be a part of the process throughout the order and delivery of your order. We strive to make this process as simple for you as possible. Once you place your order you will receive order confirmation via email. At this time if we have any additional questions about your order we will contact you within 24 hrs. Once your order is ready to be shipped and we have tracking information, we will send you this information to allow you to track the order right to your front door.







