|
Product
Description:
BEL-60 Skid Steer Extended Lip Bucket Data
Extended Lip Buckets include all the features of the B-Series with an additional 3” in depth. This extra 3” allows the operator of the machine to see the cutting edge with ease. The BEL-Series buckets are especially recommended if used in conjunction with New Holland or John Deere skidloaders.
| Part # |
I.D. Width O.D. Width |
Back Height A |
Depth B Back Angle C |
Weight |
Heaped Capacity |
Dimple Plate |
½" x 3" Bars |
Steps |
Cutting Edge |
Holes in Edge |
| BEL-60 |
60"61.5" |
21" |
33" 70º |
429.0 |
15.26 Cubic Ft |
Yes |
0 |
2 |
¾" x 6" |
Yes |
Features
- The innovative Extended Lip Bucket features a 3/4” x 6” cutting edge with holes, a radius kick-out plate, a sharp edge for back dragging, heavy duty steps and a 7 GA steel dimple plate. The Extended Lip Buckets come standard with a MPUF-1 mounting plate and powder painted black. They are available in 60”, 66”, 72”, 78” and 84” widths to suit nearly any application. These buckets have superior strength, versatility and durability; proving our company supplies buckets built the way they should be built!
- Standard on all Extended Lip Buckets is a heavy duty, reinforced dimple plate. With structurally formed and individually welded “dimples”, the BEL-Series provides unparallel strength and durability.
- 3” Longer Floor Allows the Operator to See Cutting Edge Better
- 3/4” X 6” Cutting Edge Sides for Reinforced Corners
|
|
|
Dimple Plate |
3/4” X 6” Cutting Edge Sides for Reinforced Corners
|
3” Longer Floor Allows the Operator to See Cutting Edge Better |
14 Main Reasons Why You're Getting
A Better Bucket
- 13 different options to add to Buckets, making operators more efficient
- Different mounts to fit your skidloader
- ¾" x 6" cutting edge with holes
- ¾" edge wrapped 3" around the side of bucket, reinforcing corners
- Dimple plate which makes the bottom of the bucket 5 times stronger Radius kick-out plate inside back of bucket providing easy clean out
- Radius kick-out plate provides ultimate strength at bottom of mount
- Reinforcement tube assists in holding larger products from tipping out
- Reinforcement tube in line with top of mount
- Back of bucket has sharp edge for back dragging
- ⅜" x 3" material for side cutting edges
- Heavy duty steps
- Powder coat paint provides durable & professional finish
- No open crevices-welded 100% to keep moisture out
Available Options
May not be available on all sizes.
- Bag Buster
- Bolt On Cutting Edge
- Bolt On Tooth Bar
- Bolt On Tooth Bar Over Edge
- Bolt On Serrated Edge
- Rake Tooth Edge
- Side Walk Edge
- Grapple
- Scrap Ends
- Spill Guard
- Utility Extension
- Light Duty Weld on Teeth
- Heavy Duty Weld on Teeth
|
