|
Product
Description:
UT-48 Skid Steer Utility Bucket Data
Utility Buckets are excellent for general purpose use. Your overall bucket for large and small jobs. They come standard with a MPUF-1 mounting plate, powder painted black and are available in widths of 48”, 54”, 60”, 66” ,72” and 78”. Some common uses: general purpose. Old Bobcat style utility bucket.
| Part # |
I.D. Width O.D. Width |
Back Height A |
Depth B Back Angle C |
Weight |
Heaped Capacity |
Dimple Plate |
½" x 3" Bars |
Steps |
Cutting Edge |
Holes in Edge |
| UT-48 |
48"49.5" |
21" |
33" 70º |
353.0 |
12.82 Cubic Ft |
No |
2 |
2 |
¾" x 6" |
Yes |
Features
- Utility Buckets offer superior quality.
- The inside of the bucket is fully welded and the back corner is built with a radius kick-out plate for strength and easy clean out.
- The back, outside corner is sharp which increases the strength of the bucket and also allows for ease in back dragging.
- The Utility Bucket comes standard with wear bars, a 3/4” x 6” cutting edge that is punched with holes 6” on center, a top reinforcement tube and 2 heavy duty steps.
- This bucket is powder painted black and also comes standard with a MPUF-1 mounting plate.
- All of these features prove that our company supplies buckets built the way they should be built!
|
|
|
3/4” X 6” Cutting Edge Sides for Reinforced Corners |
Picture Shown with Optional Bolt On Cutting Edge |
Wear Bars |
15 Main Reasons Why You're Getting A Better Bucket
- 9 different options to add to Buckets, making operators more efficient
- Different mounts to fit your skidloader
- ¾" x 6" cutting edges with holes
- ¾" edge wrapped 3" around the side of bucket, reinforcing corners
- Can see cutting edge on most skidloaders
- (2) ½” x 3” wear bars
- Radius kick-out plate inside back of bucket providing easy clean out
- Radius kick-out plate provides ultimate strength at bottom of mount
- Reinforcement tube assists in holding larger products from tipping out
- Reinforcement tube in line with top of mount
- Back of bucket has sharp edge for back dragging
- ⅜" x 3" material for side cutting edges
- Heavy duty steps
- Powder coat paint provides durable & professional finish
- No open crevices-welded 100% to keep moisture out
Available Options
- Bag Buster
- Bolt On Cutting Edge
- Bolt On Tooth Bar
- Bolt On Tooth Bar Over Edge
- Bolt On Serrated Edge
- Rake Tooth Edge
- Side Walk Edge
- Spill Guard
- Light Duty Weld on Teeth
|
