|
Product
Description:
UTHB-72 Skid Steer Utility High Back Bucket Data
If you need an extra capacity bucket, then the Utility High Back is the right choice. It is perfect for manure and slurry, but also works great with bulky material. They are available in widths of 60”, 66”, 72”, 78” and 84” and have different mounts to suit your skidloader needs. Some common uses: manure and slurry. To make this a New Holland Manure/Slurry Style Bucket use MPUF-5 or Different Angle.
| Part # |
I.D. Width O.D. Width |
Back Height A |
Depth B Back Angle C |
Weight |
Heaped Capacity |
Dimple Plate |
½" x 3" Bars |
Steps |
Cutting Edge |
Holes in Edge |
| UTHB-72 |
72"73.5" |
25" |
36" 70º |
532.0 |
24.63 Cubic Ft |
No |
3 |
2 |
¾" x 6" |
Yes |
Features
- The Utility High Back Buckets feature a fully welded body and a radius kick-out plate for easier clean out and maximum strength.
- The back outside corner is sharp which increases the strength of the bucket and allows for ease in back dragging.
- The Utility High Back Bucket comes standard with wear bars, 3/4” x 6” cutting edge, top reinforcement tube, 2 heavy duty steps, MPUF-1 mounting plate and powder painted black.
- All these features show that we supply buckets built the way they should be built!
|
|
3/4” X 6” X 6” High Cutting Edge Sides for Reinforced Corners & a Heavier Metal Wear Strip for Scraping Along Curbs.
|
The back outside corner is sharp which increases the strength of the bucket and allows for ease in back dragging.
|
14 Main Reasons Why You're Getting A Better Bucket
- 8 different options to add to Buckets, making operators more efficient
- Different mounts to fit your skidloader
- ¾" x 6" cutting edge with holes
- ¾" edge wrapped 6" around the side of bucket, reinforcing corners
- (3) ½” x 3” wear bars
- Radius kick-out plate inside back of bucket providing easy clean out
- Radius kick-out plate provides ultimate strength at bottom of mount
- Reinforcement tube assists in holding larger products from tipping out
- Reinforcement tube in line with top of mount
- Back of bucket has sharp edge for back dragging
- ⅜" x 3" material for side cutting edges
- Heavy duty steps
- Powder coat paint provides durable & professional finish
- No open crevices-welded 100% to keep moisture out
Available Options
- Bag Buster Bolt On Cutting Edge
- Bolt On Tooth Bar
- Bolt On Tooth Bar Over Edge
- Bolt On Serrated Edge
- Rake Tooth Edge
- Light Duty Weld on Teeth
- Heavy Duty Weld on Teeth
|
