Cut hard wood trees with ease with our heavy duty Tree Shear skid steer attachment. The Tree Shear cuts 20 inches trees. Comes with brush guard for your safety.
A great feature of the Tree Shear is the actual blade is close to the ground so there is minimal ground disturbance when cutting at ground level.
This attachment comes standard with our universal mounting plate. Other mounts are available. Hoses are included. A coupler kit is sold seperately.
20-inch diameter Tree Shear:
Perfect for larger trees. It can handle everything from woodland harvesting to large clumps of thick brush.
Cuts trees up to 20 inches in diameter
Leaves minimal ground disturbance
Approximately 4 cycles per minute
3-inch pin with hardened bushings
Adjustable blades that can be sharpened or replaced
Weight: 2,050 lbs
Hydraulic Cylinders: 6” bore, 10” stroke
Hydraulic Pressure: 2,600 PSI recommended; 2,200 minimum, 5,000 maximum
Required Flow: 10 gallons/minute minimum
Blades: Machined 1-inch high-carbon steel
The Grapple Option for the Tree Shear is ideal for the operator who desires to hold the tree as it is cut. The Tree Shear Grapples are also designed to allow the operator to carry the cut tree to another location. The Tree Shear Grapple is plumbed to open when the Tree Shear blades open and to close automatically as the shear blades close. The Grapple may, however, be operated on separate hydraulic circuits if the operator wants the shears and grapple to work independently. The grapple arms may be easily removed should the operator desire. When the arms and cylinders are removed, the frame of the Grapple becomes part of the brush guard!
Two 2 1/2-inch x 6-inch hydraulic cylinders
3/8-inch NP ports with 3/8-inch two-braid hose
2 1/2-inch x 2 1/2-inch x 1/4-inch square tubing frame
3 x 3 x 1/4-inch square tubing on shear back
The Tree Shear Swivel option allows the operator the flexibility of cutting and trimming tree limbs that might be interfering with field edges, etc. This option is manually operated. It can be placed in either the standard horizontal position for cutting trees at ground level or be placed in a vertical position for cutting tree limbs.
2-inch machined and hardened pin
1/4 x 2 x 2-inch square tubing frame
Tree Sprayer Option
The Tree Sprayer option comes with a heavy duty 4 3/4 gallon tank located on the front of the shear. The tank features the fill cap on top and a drain plug on bottom. The Tree Sprayer also features a 12 volt DC pump which is located on the back side of the tank. The nozzle is located in the enclosed round tip guard on the back of the shear. It features a drip proof screen located inside and the nozzle can be adjusted for the size of the spray pattern desired. The tip is aimed toward the front of the shear and sprays the cut root exposed underneath the blades when the shear is raised 12"-18" and the rocker switch is activated.