Breaker Hammers - Excavator | Blue Diamond
limited quantity available
LIMITED TIME FREE SHIPPING!
10% discount applied.
Sale ends December 15, 2022
FREE CHISEL TOOL OR MOIL POINT TOOL - A $370.46 to $1,041.77 VALUE
Choose your free tool. Choose between the moil point or chisel point tool. Values vary depending on breaker size.
FREE CASE OF CHISEL/TOOL PASTE - A $154.32 VALUE
QTY 12: 14 oz. Tubes of hydraulic breaker chisel/tool paste. It is recommended to paste the breaker tool before each use.
***Please note: Excavator mount pins not included. At checkout, you will be asked to provide the make and model of your machine.
This Hydraulic Breaker Hammer will outlast, out perform and provide the highest return of any breaker period!
A hydraulic breaker hammer attachment at times is the most important tool on the job. An entire job can be relying on this attachment. You need the best most affordable hammer to limit or eliminate any downtime. Well look no further. After 5 years of research and development, we have the most technological, simplistic, reliable, and ease of setup hydraulic breaker hammer on the market today.
|HB300||1,750||21.2||1,100||661 LBS||2.9||550||8,800-15,500 LBS||290-360|
|HB400||1,750||29.2||900||882 LBS||3.1||1,000||13,500-20,900 LBS||363|
|HB530||1,750||32||900||1,169 LBS||3.3||1,200||17,650-25,350 LBS||363|
|HB950||1,950||34||900||2,161 LBS||4||2,000||22,000-33,000 LBS||363|
|HB1400||2,050||37||600-800||2,976 LBS||4.6||3,000||30,000-50,000 LBS||145|
|HB1800||2,050||53||460-630||3,968 LBS||5.4||4,000||48,000-70,000 LBS||145|
|HB2500||2,200||61||460-630||5,291 LBS||6||5,000||60,000-80,000 LBS||145|
|HB3000||2,350||75||380-500||6,614 LBS||6.5||7,000||70,000-110,000 LBS||145|
- 3 year warranty
- Mono-block design / no tie rods
- Anti-blank firing system hydraulic brake
- Operated with oil actuation (newest technology)
- No regassing needed / not nitrogen fed
- less maintanance needed
- Only 2 internal moving parts
- 2 speed control / variable stroke
- Quiet Operation
- Body bushings around piston
FREQUENTLY ASKED QUESTIONS
- What does Monoblock mean?
‘Monoblock’ refers to the housing in which the piston operates. The Blue Diamond Breaker housing is one piece, so it doesn’t use 4 tie-rods to hold it together like the majority of other brands. Tie-rods are notorious for stretching and breaking, causing mass destruction to the tool.
- Do I really not need to adjust the flow and pressure of my machine?
Yes, as long as you are operating a breaker on the right size host machine. Industry-leading technology components will control incoming and outgoing flows to specified amounts.
- What are the sleeves inside the Monoblock for?
The sleeves are there to protect the Monoblock in the event of piston damage, and if damaged, they are cheap and simple to replace. The very few brands that use Monoblock technology now do not use sleeves, so a repair could cost almost as much as the breaker.
- Do I have to re-gas when servicing?
No, the accumulator can be removed as an assembly and not be disturbed; the energy recovery system keeps it from needing to be topped up!
- In order to have my 3-year warranty honored, do I have to have it serviced by a dealer regularly?
No, unless it develops an oil leak, do not take it apart at all, just grease it and use it!